How to make a paper tulip with your own hands, instructions with photos. Paper tulip (84 photos): detailed step-by-step instructions for creating paper flowers How to make a paper tulip

What could be better than a gift of flowers? Flowers always evoke the most pleasant emotions. And the paper flower will stay in the vase for a long time. At our master class we will introduce you to the origami technique and show you step by step how to make a beautiful tulip out of paper.

We will need:

colored paper (we will use yellow)
scissors
good mood

Take a piece of paper. Choose the sizes yourself, it depends on what kind of flower you want to make. You can take a sheet of A4 paper. Fold the sheet into a triangle as shown in the photo.
Use scissors to cut a rectangle and set it aside.
Open the triangle. You have a square. Fold it into a triangle again, but this time with different sides. When you unfold your work, you will clearly see the cross.
Turn over the leaf. The work at this stage will look like a pyramid. Fold the work in half. Turn over and unfold. Then fold again from left to right. You should have four lines across the entire surface of the work. A kind of star made of stripes.
Now we need to make a triangle. We need to press a little on the center of the square from below. As a result, you will get a pyramid. You need to bend the corners of one triangle towards the center, smoothing them with your fingers.
Turn the triangle over with the sharp angle facing you. Do the same with the other two triangles. Then fold the corners into the middle, as shown in the picture.
Turn the craft over and do the same with the second, lower triangle. After all these manipulations, you should end up with a rhombus.
Now grab a small triangle on top of the diamond and bend it towards the center. Next, turn the work over and do the same with the other triangle.
Look carefully at the picture. You need to insert the corner on the left into the corner on the right. Then spread it out with your fingers. You will get a triangle on top of the rhombus. Next, turn the work over and insert one end into the other in the same way.
And now the fun begins. Take in more air into your lungs and blow into the hole at the bottom of the tulip. Turn the edges of the petals away from you.
Our flower is ready, all that remains is to make the petal. Take the rectangle that you cut at the beginning of the project. Bend it into a tube. Insert into the hole of the flower bud. If you don't want to make a paper stem. You can take a simple straw or a thin twig. The branch just needs to be painted green to make the craft look more realistic.

Tulips are spring flowers loved by many. But, unfortunately, the flowering time of tulips is quickly ending. And cut flowers soon lose their attractiveness.
But paper tulips will remain in their original form for a long time and will delight you and your loved ones at any time of the year. If you want to make an original gift that will never fade, give a tulip made by yourself. Or make a whole bouquet and decorate your room with it. Today we will look at several techniques for making flowers.

Lesson No. 1: voluminous tulips made from paper triangles

The first lesson is the most difficult to implement. But this only makes it more interesting! To assemble this flower, you will need a large number of triangular parts (95 for each flower). They are done as follows:
1. Cut a sheet of A4 size into 16 equal squares.

2. Take one of the squares and fold it in half horizontally.

3. Fold the square again vertically, then unfold it.

4. Fold both edges of the rectangle along the center line and carefully smooth both folds.

5. Turn the shape over and cut off the ends protruding from the bottom.

6. Fold the bottom edge of the shape up and smooth the fold.

7. Fold the figure in half towards you.

8. Repeat all these steps on the remaining squares.

Having made the required number of parts, you can begin assembling the flower:
1. Form rows 1 and 2, connecting the parts through the slots in the end.

2. Make a circle with 15 pieces in each row.

3. Add a third row.

4. Turn the workpiece over and squeeze it into a bud.

5. Add rows 4 and 5 with 15 pieces each.

6. Next, build on the structure on one side so that you get a triangle:

Row 6 – 4 pieces Row 7 – 3 pieces (on top of Row 6) Row 8 – 2 pieces Row 9 – 1 piece
Repeat the addition on the opposite side of the flower, opposite this triangle.

All that remains is to make the stem. To do this, take a sheet of thick paper and, rolling it into a hard thin tube, wrap it with green floral ribbon.

Apply a little glue to the end of the stem and insert it into the tulip.

Cut and glue 1-2 oblong-shaped leaves to the stem.

The tulip is ready!

Master class No. 2: tulips made from tissue paper

In this lesson you will learn how to make very delicate, airy, thin and graceful tulips. At the same time, they will be quite simple to make; all you need is perseverance and a little skill in working with watercolor paints. They can be an excellent gift not only for the mother from the child, but also for the girl she loves.
Materials:
White, yellow and green tissue paper
Watercolor paints
Several poshatnitsa (stands for boiled eggs)
Drinking straw
Glue
Operating procedure:
1. Cut out identical petals with slightly wavy edges from white tissue paper.
2. Stick two petals on top of each other (one layer of tissue paper is too thin and will be difficult to work with).
3. When the glue has dried, place the petals on a flat surface, such as a tray, and paint with watercolors.
4. Without waiting for the petals to completely dry, carefully lift them from the tray and place them in the tillers to give them a curved shape.
5. Place the tillers near a heat source to dry the paper.

6. Cut a wide strip of yellow tissue paper, fold it in half lengthwise and make a fine fringe along the double edge.
7. Wrap the strip around the edge of the drinking straw and secure with glue - this is the core of your flower.
8. Remove the dried petals from the tillers and glue them to the tube around the core.
9. Cut a strip of green tissue paper and, securing the edge under the flower, wrap the entire tube. Tape the opposite end of the tape.

Instruction No. 3: tulips made of thick colored paper

The easiest way to make flowers. It is perfect for small children.
Materials:
Thick colored paper (about 270 g/sq.m.)
Wooden sticks for stems
Green acrylic paint
Hot melt adhesive
Stationery glue
Green felt-tip pen with soft tip
Flower template that can be downloaded here
Sheet of cardboard
Operating procedure:
1. Print or draw on cardstock and cut out the template for the flowers and leaves.
2. Cut out 4 flowers and 1 leaf for each tulip.

3. Fold the flower blanks in half along the center line (if the paper is one-sided, the colored side should remain inside). Iron the fold and unfold them to their original position.

4. Glue two pairs of blanks as shown in the photo.

5. If the edges of the pieces don't quite match, trim off the excess.

6. Paint the sticks with green paint and let them dry.

7. Now glue two pairs of flower blanks, placing the edge of the stem stick between them. While the glue dries, the parts can be pressed together with paper clips.

8. Cut out leaves from green paper and draw center lines using a green marker.
9. Glue the leaves onto the stems.

Lesson #4: classic origami tulip with stem

Not the simplest, but also far from the most difficult option for creating a paper tulip using the origami technique. This lesson can also be brought to life together with your child. For this project you will only need square pieces of paper - green and yellow.
flower head
1. Place the yellow sheet with the colored side up, fold it in half vertically and horizontally, and then return it to its original position.

2. Turn the sheet over and make two diagonal folds, then unfold it again.

3. Fold the square into a triangle so that the two side points meet on the bottom.

4. Bring the side corners of the top layer of the shape up along the center line. Then turn the shape over and do the same on the other side.

5. Flip the right side of the diamond to the left, then flip the piece over and do the same on the other side. You will get the same diamond shape, but with a smooth surface.

6. Bring the edges of the top layer together and nest one inside the other. Smooth the folds along the edges and make sure that sections A and B are equal.

7. Repeat the same on the other side of the figure.
8. Grasp the resulting cones on both sides, slightly spread them apart and inflate the bud through the hole that has opened at its base.

9. Fold back the edges of the petals at the top of the bud.

Stem
1. Place the green square on the table, color side down, as shown in the diagram, and make a vertical fold. Then return the square to its original position.

2. Fold the corners toward the center along the first fold line.

3. Next, bend the resulting corners again along the same line, and then again.

4. Turn the figure over and fold it in half lengthwise, raising the bottom corner to the top.

5. Fold the resulting shape in half in width.

6. Bend the top edge of the outside of the shape outward.

7. If you did everything correctly, you will have a stem like this that can be placed on the table:

Now simply place the tulip head on the vertical rod.

The most popular spring flower is the tulip. You can make tulips from crepe paper, from corrugated paper, or make origami - such a craft will be very useful for a women's holiday or birthday. We offer a simple lesson on how to make a tulip out of paper.

Paper tulips: master class

Paper crafts like a tulip can be classified as simple, but quite impressive. To work you will need a sheet of thick paper, scissors and a pencil. Now let's look at step-by-step instructions on how to make paper tulips:

1. For work, prepare a sheet of paper measuring 20x28cm. Choose the color at your discretion, preferably close to the real color of the tulip. There is only one requirement for paper - it must be strong enough.

2. Make a triangle out of paper. The strip of paper that extends beyond the edges of the triangle should be cut off and set aside. We will use it a little later.

3. Now let's look at how to fold a paper tulip. First you need to unfold the triangle, then fold it again, but in the other direction. The result should be a square with diagonals.

4. To fold a paper tulip bud, fold the folds properly again. Flip the paper over so the center is facing up.

5. Fold the paper in half. We wrap one corner to the fold line. This creates a new triangle. We carry out this procedure with another angle.

6. Tulip and other similar paper crafts require constant contact with the material, the folds must be clearly visible. This is what you should end up with:

7. Connect the sides of the tulip and align them well.

8. Turn the triangle with its base up.

9. The wings of the paper on top must be folded so that they meet at the corners.

10. Turn it over to the other side and do the same.

11. Turn one wing of the paper to the right. On the other hand we duplicate.

12. Carefully insert the end of one wing into the other.

13. On the other side we do the same. We iron everything thoroughly. At this stage, the workpiece is already beginning to resemble the head of a tulip, only slightly flattened.

14. Now let's look at how to make a voluminous paper tulip from this blank. We hold the folded wings with our index finger and press down with our thumb.

15. Now an important point. There is a hole in the center of the paper, you should hit it sharply. Then the structure will be filled with air; you can also use a pencil.

But what to do if spring is still far away, but you really want to please yourself and your loved ones with rainbow-colored bright flowers? We offer make beautiful flowers with your own hands from colored and corrugated paper. Below you will find master classes and step-by-step instructions with photos on making tulips.

The main thing in the article

How to easily make a simple white tulip from paper for beginners: step-by-step instructions

To make a white tulip, it is enough to have a regular A4 sheet, scissors and glue, which will need to be used to glue the bud to the stem. For clarity, we will show a step-by-step example of making a tulip on a yellow A4 sheet. We perform the following actions:

Take a sheet of paper. Fold it on a corner.

Cut off the excess to make a square.

Fold this square diagonally twice. It turns out to be such a preparation.

Turn it over with the convex part up.

Now fold the sheet in half twice to form a cross-shaped fold.

Make a triangle from a square with folds, hiding the side parts inside.

Lower the sharp part of the triangle down.

Fold the top edges of the triangle upside down.

Turn the workpiece over and repeat the steps of folding the edges towards the center.

Turn half of the square to the right so that the whole square is visible (without the folded inside). Do the same on the reverse side.

Now tuck the folded edges into one another on both sides, as shown in the photo.

Press the workpiece.

Stretch the workpiece using the resulting pockets.

There is a hole in the center into which you can blow or use a stick or screwdriver to straighten the folded paper to form a voluminous bud.

Turn the bud over and stick out the top leaves. This can be done using a pen, which you can use to twist the petals of the bud.

Take the previously cut piece of paper.

Make a flower stem out of it.

Connect the stem and bud. For greater strength, glue the parts together.

How to make a paper tulip very easily for a child?

Children really love various crafts made from colored paper. It will be quite difficult for a child to master the design given above, so we offer a tulip option for the little ones. It can be made from square sticker sheets of different colors.

Initially you need make a bud. A square piece of red, yellow or orange color is suitable for this. Fold it diagonally. It turns out to be a triangle, the middle of which must be marked. According to the diagram, fold the right and left petals to form cloves. Bend the sharp part of the triangle and hide it inside the bud. The bud is ready.

Now let's get to the stem. Take a green or light green leaf sticker and fold it diagonally. Fold the edges of the sheet to a diagonal fold. Fold the resulting workpiece in half. The last fold is to make the leaf.

Now you need to insert the resulting stem into the bud and the tulip is ready for the little ones.

How to make a tulip from colored paper step by step?

To make a tulip from colored paper, we prepare the following tools and materials:

colored paper;
pencil;
cardboard;
glue;
large wooden skewer.

Stages of working on a flower:

Initially, you need to cut out a flower template from cardboard. On colored paper, draw four petals according to the template. Cut them out.

Bend each of the petals in the center and glue them together.

Wrap the skewer stick with a strip of colored paper coated with glue. Place the bud on the stem. Cut out green leaves from colored paper.

How to make a tulip flower from corrugated paper step by step?

We suggest trying to make a beautiful bouquet of tulips from corrugated paper. To work you will need:

Corrugated paper (red, green).
Sticks or long skewers for stems.
Glue gun, or if you don’t have one, just paper glue.
Scotch.
Plastic spoons.
Scissors.

The work of making a tulip is carried out as follows:

Cut strips of red corrugated paper 2–3 cm wide and 15–16 cm long. Fold each strip in half.

Trim the edges of the future petal to a point and fold it twice.

Unfold the strip, twist it in the center, and place one half into the other, forming a petal. It should turn out convex, like a real tulip.

Attach the resulting petal to the base of the stem (stick or skewer). 3-4 petals are glued onto one stem, after which the entire paper structure is fixed with tape.

Cut long strips of green crepe paper. Apply glue to the place of fastening (adhesive tape).

Wrap long green strips around the stem and glue the edges with glue.

Cut strips of green corrugated paper for sheets 2–3 cm wide and 18–20 cm long. Fold and trim the corners along the edges.

Unfold the strip and fold it twice in the center, insert half of the strip into the other, like the petals of a bud.

Apply the narrow part of the leaf and glue it to the tulip stem.

DIY voluminous paper tulip: diagram and photo

For a voluminous tulip, you need to cut out two daisy templates with 4 and 6 leaves. Afterwards, fix the finished daisy templates on the stem, for which you can use a wooden skewer or thick wire. Glue the petals one to one to make a bud.

Make leaves for the tulip from green paper. Decorate the flower and place it in a beautiful pot.

Using a similar principle, you can make a three-dimensional tulip from pastel paper.

To make such tulips, you need to make pastel paper blanks in the shape of a five-leaf daisy. Before folding the bud, wet each piece in water and dry it on a napkin. For the stem, use green twine, tying a knot at the end.

Make random embossing on the wet daisy blank so that the tulip looks like a real one. Make a hole in the center and stretch the twine through it, gluing it with glue.

Lubricate the petals of the bud with glue and form a bud. Decorate the green tulip leaves with stripes, which can be made with a stem without paste. Glue the leaves to the tulip.

How to fold an origami tulip from paper: diagram

- a technique that has conquered the whole world. Such handicrafts also included a flower called a tulip, which can be folded from origami modules.

To implement it, you need to make modules as follows.

Now, according to the diagram, assemble the tulip.

How to make a tulip from candies and paper?

A handmade one can be an excellent gift. To make it we prepare:

candies, preferably in the form of balls;
corrugated paper;
scissors;
glue;
base for the stem (wire or wooden skewer).

Let's start creating a bouquet:

Cut the corrugated paper for the bud into strips 2–3 cm wide and 20 cm long. Twist the strip in the center and fold it into a petal. Prepare the base by attaching the candy to the future stem.

Cover the candy with three petals and attach one part first, then the second, as in the photo. Attach three more petals on top in the same way.

Wrap the stem of the tulip; tape is perfect for this. Make leaves out of green corrugated paper and you can put together a bouquet of these

Such a gift will certainly be appreciated.

Bouquet of paper tulips: photos of beautiful ideas

Decorate your home with bright, beautiful flowers and give your loved ones a good mood in the form of elegant paper tulips.

A wide variety of original crafts are created from such a simple material as paper. For example, you can create such a wonderful flower as a tulip or even a huge bouquet of them. Such a composition will retain its attractiveness for a very long time, thereby decorating the interior and introducing a spring note into it. Making a tulip out of paper is quite simple, and besides, it is a very exciting activity!

This master class describes in detail the process of creating a tulip from paper, or rather creating an entire bouquet! Yes, yes, today we will show you how to make beautiful tulips out of paper with your own hands!

For this you need materials and tools such as:

- colored paper;
- pencil;
- ruler;
- scissors;
- vase;
- pebbles for a vase.

To create a tulip, you can use any colored paper, both double-sided and with a tint on only one side. When assembling the bud, the back side of the paper will remain inside. It is desirable that it be in A4 format. It is necessary, using a ruler and pencil, to divide the sheet into squares; it is better to make them in several, different sizes.

You can choose the necessary shades for a flower arrangement yourself.

The squares along the contour must be carefully cut out.

One such square is needed for one tulip bud. This composition consists of 27 tulips, that is, a total of 27 squares of various shades are needed.

Afterwards, the square must be folded diagonally.

Then, do the same, connecting the other corners.

You will get something like this.

Afterwards, the side corners are folded like this.

The same thing needs to be done on the other side. You will get a figure like this.

Then, the resulting corners must be folded so that they are inside the sides.

The same must be done with the other three corners. And then connect them to each other.

You will get a ready-made, but not yet opened tulip.

In order for it to become voluminous, you just need to inflate it. At the base of the bud, below, there is a hole through which the craft is inflated.

After it has gained volume and turned into a nice tulip bud, its petals need to be straightened a little.

The paper tulip bud is ready!

But not all the resulting buds need to be straightened; a few can be left unopened for variety in the composition.

In the end, we got 27 wonderful buds, which just needed to be made into stems and leaves.

And they are made from paper strips.

The strips are twisted into ordinary tubes.

Then, the tube is inserted into the bud.

In this very simple way, all the buds acquire stems.

On a green sheet, you need to sketch tulip leaves.

Then carefully cut them out and shape them.

Afterwards, pour small decorative stones into the bouquet basket.

And the final stage in creating a bouquet remains: you need to insert all 27 tulips into the basket, not forgetting about the leaves! The pebbles will hold the stems and leaves in place well.

That's all, a wonderful bouquet of paper tulips is ready!