The swan is a beautiful and noble bird. It symbolizes purity, wisdom and loyalty. It is not surprising that bird figurines are used to decorate weddings and birthdays. How to make a swan out of paper? In the article you will find interesting assembly methods with step-by-step instructions.

How to make a paper swan step by step

For children and beginners, a paper figurine assembled using the conventional origami method is suitable.

When creating crafts, fine motor skills and thinking develop.

You can decorate the interior of a children's room with a paper swan.

What materials will you need:

• sheet A4;
• scissors;
• colour pencils.

So, how to make origami out of paper:

1. Cut part of the A4 sheet to make a square.
2. Bend the square diagonally.
3. Make cuts on both sides of the triangle. This is how you get feathers.
4. Straighten the sheet.
5. Draw the two bottom corners to the main line.
6. Turn the paper over to the other side.
7. Bring the bottom two pieces to the line again.
8. Fold the piece in half. Make sure that the bottom corner is brought to the top corner.
9. Form a swan's head by folding the corner down.
10. Bend the workpiece in half, moving away from you.
11. Bend your neck up, straighten your head.
12. Finish the bird's head along the marked folds. Don't forget to bend the beak.
13. Draw the eyes with a black pencil, and the beak with a red pencil.

The craft is ready. Joint creativity will delight children.

Paper swan: modular origami

The technology for creating modular figures came from China. It is not difficult to assemble the craft. A lot of time is spent on the manufacture of composite modules.

The design will be seamless due to the assembly features. The paper parts are inserted into each other so that the friction force prevents them from falling apart. If you want to give a craft as a gift, then it is better to glue the parts.

To assemble a paper swan, take the following materials:

• A4 sheets or blocks;
• 1 red and 458 white rectangles.

Find out how to fold the modules:

1. Draw the A4 sheet into 4 equal parts on both sides. The result will be 16 parts (53x74 mm).
2. Cut the rectangles and create modules.
3. Turn the sheet with the long side facing you. Fold it in the middle.
4. Fold it in half again and unfold it, marking a line.
5. Fold the top edges to the line in the middle.
6. Turn it over.
7. Bend the bottom corners up.
8. Bring the edges up. You will get a triangle.
9. Bend the figure in half.

Do the same with the remaining rectangles.

We'll tell you how to assemble origami from modules:

1. Insert the ends of two other modules into the two holes of one module. Collect the swan using this pattern.
2. Attach two more pieces to the main group. The first row will be in the shape of a ring.
3. Then carry out the assembly along the chain. At the end, close it with the last triangle. Each chain contains 30 modules.
4. Parts of the 3rd, 4th, 5th rows, fasten in a checkerboard pattern.
5. Lift the base by the edges. Make a movement as if turning the workpiece inside out. The shape should resemble a bowl.
6. Continue assembling the sixth row.
7. In the seventh row, leave two gaps - for the head and tail. The rest is paper swan wings.
8. Next, apply the wings. Make each layer smaller by one triangle. As a result, there are 18 rows. The latter consists of only two modules.
9. Also collect the tail to reduce it. There will be 12 parts in total.
10. Proceed to the neck. Insert the two corners of one triangle into the holes of the other. Place the red module first, then connect the rest with a snake.
11. Give your neck a natural curve. Secure it in place with two needles.
12. Draw or glue on the eyes.

The origami swan is ready. This is a great activity to do together with children.

This craft will be an original gift for friends and a decoration for your home. The main thing is to show desire and perseverance.

Working with paper allows you to develop fine motor skills, which has a beneficial effect on the overall development of the child. You can develop fine motor skills by making various birds and animals. This also allows you to explore the diversity of the animal world with your child. One of the most beautiful and graceful birds is the swan. So, how to make a paper swan step by step?

Working with paper allows you to develop fine motor skills, which has a beneficial effect on the overall development of the child.

One of the most beautiful swans made of paper is considered to be the one made from modules. To create this craft, you will need to make a large number of triangular modules.

The first step is to make modules:

1. A4 sheet is divided into 32 equal parts. To do this, its length is divided into 8 parts, its width into 4.
2. Each resulting rectangle is folded in half along its long side.
3. The elongated rectangle is then folded in half, connecting the two short pieces to each other.
4. The previous step is turned back, and the halves of the upper side, consisting of two layers, are applied to the resulting middle line.
5. The workpiece is turned over. The outer corners of the bottom rectangles are folded. And then the rectangular pieces with a beveled corner are bent to the main triangular element.
6. The workpiece is bent in half.

Gallery: pictures of a paper swan (25 photos)

How to assemble a swan from modules?

Assembling a swan using modular origami technology is quite simple, but it requires concentration, since an error in counting can lead to the formation of a crooked figure.

To work you will need:

• 458 white modules;
• 1 red module.

Assembling a swan using modular origami technology is quite simple

Step by step steps:

1. Each row of the swan's body consists of 30 elements. The first step is to assemble two rows at the same time: the left pocket of the upper element is put on the right acute corner of the lower triangle. In this way, all 60 elements of the first 2 rows are collected. With the help of the last module, the chain is closed into a ring.
2. Next, rows 3-5 are cast one by one.
3. The resulting workpiece is turned inside out. Next, another row is built in a similar way.
4. In the 7th row the wings begin. For the head, 2 adjacent corners are left. On both sides of them 12 elements are attached. Thus, the 7th row forms a total of 24 elements.
5. In each subsequent row of wings, it is necessary to reduce the number of elements used by 1 part. For example, in row 10, only 9 elements will form 1 wing. From the 11th row, 2 elements are decreased. Working according to this scheme, it is necessary to make the 18th row from 1 element for each wing.
6. Gently bend the wings with your fingers, giving them a graceful concave shape.
7. A tail is made between the wings at the back. The first tail row consists of 5 elements. Each row should be reduced by 1 piece until a sharp tip is formed.
8. Then the neck is done. To do this, 1 module is attached to the remaining 2 corners, 2 elements are attached to it, then 1 again. This assembly pattern is repeated until all the white modules are gone. The neck should be crowned with a red module - the beak.
9. The neck is given a curved shape. Eyes are attached to the head.

This swan can also be made colored. To do this, the white paper should be replaced with the one that most closely matches the shade to the desired purpose. One of the most spectacular design options for such a figurine is the assembly of a rainbow bird.

Large paper swan: step-by-step instructions

Using modular origami, a large swan can be made.

The assembly of this model has some features:

1. Assembling the bird follows similar instructions, however, the rectangles prepared for forming the modules must be larger. So, an A4 sheet should be divided not into 32 parts, but into 8. As a result, the modules will be 4 times larger in size.
2. You will also need to use PVA glue to assemble the large swan. This should be done to strengthen the structure.
3. Each row of the bird's body should have double or triple the number of parts.

A large swan can be made using modular origami

If you want to make a large rainbow swan, you need to use paper of similar tones, since the contrast on large details will be very noticeable.

Swan: modular origami for beginners (video)

How to make a paper swan using origami?

To make a swan using the origami technique, you only need a square of white paper.

Making a bird step by step:

1. The square is bent into a basic triangle shape and then returned to its original state.
2. Adjacent corners should be folded toward the center along a diagonal fold.
3. Next, you need to bend the sides of the formed triangle by 1/3.
4. The resulting angle bends by more than 50%. Then a small corner is bent to form a swan’s head.
5. The workpiece is bent in half, the tail is bent, the wings are straightened.

To make a swan using the origami technique, you only need a square of white paper

Using such figures you can create voluminous appliqué works.

Volumetric paper swan

You can also make a swan out of paper by cutting it out.

To do this you will need:

• sheet A4;
• glue;
• clamp;
• scissors.

Such figurines look very impressive as a New Year's decoration.

How to do:

1. Sheet A4 is folded in half lengthwise. A template is drawn on the sheet.
2. Next, the template is cut out using scissors. Through cuts are made on parallel inclined lines.
3. The tail part is turned inside out and glued to the neck part.
4. In order not to hold the figurine until the glue dries, you can fix it with a clamp.
5. The beak is painted red, and an eye is drawn on the head.

Such figures look very impressive as New Year's decorations for a kindergarten or school.

Big swan from children's hands

An excellent option for decorating a group in kindergarten is to create a large paper swan from children's handprints. All you need is paper and glue.

How to do:

1. The first step is to cut out the base of the swan with a small oval body, spread wings, graceful neck and head.
2. Next, each child traces their palms on a piece of paper and then cuts out the resulting shape.
3. The swan's wings are decorated with carved palms, like feathers, pointing the fingers away from the bird's body. The prints should be placed overlapping, starting from the edge of the wings. One handle should be placed in the narrowest part of the wing, two in the second row, and three in the third. When the wing acquires a more uniform structure, the number of palms should be left unchanged, placing each rad in a checkerboard pattern in relation to the previous one.
4. Then the resulting figure is decorated with a beak and eyes.

In this work, you should not use a large amount of glue, as it can deform the main figure and lead to its unnatural bends.

How to make a paper swan with your own hands: a simple origami lesson (video)

Paper crafts are objects into which every child puts his soul. By creating them, he develops creatively, and also develops such necessary qualities as perseverance and attention. In the first stages of teaching a child to work with paper, he should be asked to perform basic models of figures. Gradually, with a certain amount of experience working with this material, the child will improve them, finding his own ways of decorating and creating new forms.

(No ratings yet)

Modular origami is a technique that allows you to make amazingly beautiful three-dimensional figures from paper. The difference between this technique and classic origami is that to create crafts, not one, but several sheets of paper are used, from which modules are made, which, in turn, are folded to form the desired shape.

One of the striking examples of the technique is a swan made of triangular modules. As a result of simple but rather painstaking work, you can get a beautiful bird. Depending on what color paper you have at your disposal, you can make a white or colored rainbow swan from modules.

Looking at the photographs of the finished figures, it is even theoretically difficult to imagine how to make a swan from modules - it seems to be very difficult and intricate. In fact, there is nothing complicated in making figurines; you just need to study in detail the master class on making a swan from modules with an assembly diagram and consistently follow the steps described there.

We bring to your attention a detailed guide consisting of two stages - manufacturing the components and assembling the finished product.

How to make a swan from modules?

First you need to make modules. To do this, you will only need sheets of regular xerox paper, white or colored, depending on what you want to get as a result.

Progress:

1. Fold a sheet of A4 paper in half widthwise.

2. Fold it in half again.

3. And fold it in half again.

4. Unfold and turn over so that the fold lines are vertical.

5. Fold the sheet in half again, but in a different direction.

6. And fold it in half again.

7. Unfold and cut or tear the sheet along the fold lines so that you get 32 ​​rectangles.

8. We take one of the rectangles and start making the module.

9. Bend in half.

10. Now we bend it across the first fold line.

11. Unfold and fold the bottom corners inward towards each other.

12. Fold the top corners as shown in the photo.

13. Now bend the top part down so that you end up with a triangle.

14. Fold the resulting triangle in half.

15. We repeat similar steps with other paper rectangles.

16. We got a triangular module with a pocket so that we could insert another one into it.

How many modules are needed for a swan?

The number of blanks directly depends on the assembly scheme and the size of the future bird. For example, the assembly diagram below uses 458 white triangles and one red triangle. By reducing their number and simplifying assembly, you can get a small swan from modules.

Assembling a swan from triangular modules

1. We arrange the three modules in the order shown in the picture.

2. We insert the corners of the two upper modules into the pocket of the lower one.

3. Similarly, we attach two more triangles to the structure.

4. We insert 3 pairs of triangles into the outer modules.

5. Then we proceed in the same way.
6. Using 30 modules, we get this design.

7. Add 3 more rows, a total of 5 rows of modules should be obtained.

8. Pressing the structure in the middle, we turn it inside out.

9. We bend the edges up so that the bowl looks like in the picture.

10. Bottom view of the structure.

11. Using the same principle as before, we put on the 6th and 7th row of modules.

12. Starting from row 8, we begin to construct the swan’s wings. To do this, we put on 8 side by side 12 modules, skip 2 and attach 12 more. In the place where 2 triangles are missing there will be a neck, on the remaining section of the 7th row there will be a swan’s tail.

13. In the 9th row, we reduce each swan wing by 1 triangle.
14. We continue further, decreasing the wings by 1 with each row until one module remains.

15. We make a tail, similarly reducing the row by 1 module.

16. For the neck and head we take 19 white and 1 red module in which we glue the corners together to form a beak.
17. We begin to assemble the neck, putting the corners of one module into the pockets of another.

18. We bend the structure with a crochet hook.

19. The final step is to insert the neck into the gap between the swan’s wings.
20. The swan made from paper modules is ready.

You can make other crafts from the modules, for example,

You can learn how to make a small swan from modules using the origami technique from our article. It takes little time and materials to make. Almost anyone who has the necessary materials and a simple tool, such as scissors or a stationery knife, can cope with the work. A small swan figurine will be an excellent decoration on your desktop or as an addition to a gift for a loved one.

Origami is a very ancient art form that came to the world with the light hand of the Japanese. Various paper figures amazed us with their simplicity and, at the same time, beauty and grace. Products made using the modular origami technique have a particularly unique look. Everyone without exception likes their expressiveness and realism. For the most part, these are quite large, voluminous products, the production of which takes a lot of time. But there are also small modular figures, in no way inferior to their larger relatives. In our article we will talk exactly about such small origami. Today you will learn how to make a small swan from modules.

To get started, we need to take paper of three colors - white, red and orange. And, of course, scissors. To begin with, we will prepare modules - individual elements, which are the material for constructing the product. To operate, you need twenty-two orange modules. This color is not important, so you can replace it with any other. Also, it is necessary to prepare one hundred and thirty modules of white color and one of red.

Making modules is easy. We will take an A4 sheet of paper and fold it in half. Fold the resulting version in half again and again. Then we unfold the sheet. By cutting it along the folds, we get sixteen modules. To make them smaller (ideal for our product), we will fold the sheet in half one more time, which will give us the opportunity to get thirty-two modules.

After these steps, using scissors or a stationery knife, we will cut it into separate parts (sixteen or thirty-two). Then we proceed according to the proposed scheme below.

As a result, we should have the following elements - modules.

Each individual row of the little swan will consist of fifteen modules, which we will place as shown in the photo.

We connect them together as follows.

In the process we will see this picture.

We finish working with the second row of the product and move on to the third.

We will perform the third row according to the principle already known to us.

After finishing work on the third row, we will get this nice pointed figure.

We continue to attach modules in subsequent rows (fourth, fifth, sixth and seventh).

In the next row we begin to form the wings of our little swan. To do this, we will connect the modules in the following order: one orange module, four white modules and again one orange module.

In the next row we attach in order: one orange module, three white modules and one orange.

• one orange module, four white modules, one orange module;
• one module orange, three white, one orange;
• one orange, two white modules, one orange module;
• one orange module, one white module, one orange module;
• two orange modules;
• one orange module.

We will make the second wing of the swan in the same way.

We get the following result.

Now we need to make the neck. To do this, we will put fifteen white modules on top of each other and one red one, which will serve as a beak.

We attach the neck to the body.

A small swan made using modular origami technique is ready. If desired, we can make a whole family of cute little swans.

One of the striking examples of the technique is a swan made of triangular modules. As a result of simple but rather painstaking work, you can get a beautiful bird. Depending on what color paper you have at your disposal, you can make a white or colored rainbow swan from modules.

Looking at the photographs of the finished figures, it is even theoretically difficult to imagine how to make a swan from modules - it seems to be very difficult and intricate. In fact, there is nothing complicated in making figurines; you just need to study in detail the master class on making a swan from modules with an assembly diagram and consistently follow the steps described there.

We bring to your attention a detailed guide consisting of two stages - manufacturing the components and assembling the finished product.

How to make a swan from modules?

First you need to make modules. To do this, you will only need sheets of regular xerox paper, white or colored, depending on what you want to get as a result.

Progress:

1. Fold a sheet of A4 paper in half widthwise.

   

2. Fold it in half again.

   

3. And fold it in half again.

   

4. Unfold and turn over so that the fold lines are vertical.

   

5. Fold the sheet in half again, but in a different direction.

   

6. And fold it in half again.

   

7. Unfold and cut or tear the sheet along the fold lines so that you get 32 ​​rectangles.

   

8. We take one of the rectangles and start making the module.

   

9. Bend in half.

   

10. Now we bend it across the first fold line.

    

11. Unfold and fold the bottom corners inward towards each other.

    

12. Fold the top corners as shown in the photo.

    

13. Now bend the top part down so that you end up with a triangle.

    

14. Fold the resulting triangle in half.

    

15. We repeat similar steps with other paper rectangles.

    

16. We got a triangular module with a pocket so that we could insert another one into it.

How many modules are needed for a swan?

The number of blanks directly depends on the assembly scheme and the size of the future bird. For example, the assembly diagram below uses 458 white triangles and one red triangle. By reducing their number and simplifying assembly, you can get a small swan from modules.

Assembling a swan from triangular modules

1. We arrange the three modules in the order shown in the picture.

   

2. We insert the corners of the two upper modules into the pocket of the lower one.

   

3. Similarly, we attach two more triangles to the structure.

   

4. We insert 3 pairs of triangles into the outer modules.

   

5. Then we proceed in the same way.
6. Using 30 modules, we get this design.

   

7. Add 3 more rows, a total of 5 rows of modules should be obtained.

   

8. Pressing the structure in the middle, we turn it inside out.

   

9. We bend the edges up so that the bowl looks like in the picture.

   

10. Bottom view of the structure.

    

11. Using the same principle as before, we put on the 6th and 7th row of modules.

    

12. Starting from row 8, we begin to construct the swan’s wings. To do this, we put on 8 side by side 12 modules, skip 2 and attach 12 more. In the place where 2 triangles are missing there will be a neck, on the remaining section of the 7th row there will be a swan’s tail.

    

13. In the 9th row, we reduce each swan wing by 1 triangle.
14. We continue further, decreasing the wings by 1 with each row until one module remains.

    

15. We make a tail, similarly reducing the row by 1 module.

    

16. For the neck and head we take 19 white and 1 red module in which we glue the corners together to form a beak.
17. We begin to assemble the neck, putting the corners of one module into the pockets of another.

    

18. We bend the structure with a crochet hook.

    

19. The final step is to insert the neck into the gap between the swan’s wings.
20. The swan made from paper modules is ready.

You can also make other crafts from the modules, for example, a hare or a vase.

Modular origami is a technique for folding paper figures that uses not one, but several paper sheets at once. In this case, each individual sheet turns into a module, and from them a figure is formed. Now this 3D origami is common not only in China, but also in many Western countries.

Now let's talk about how to make a separate module. Prepare a small rectangular piece of paper for this. Place it back side up.

Fold the rectangle in half lengthwise.

Fold in half crosswise.

Leave a small gap and turn it over, bending the corners to the middle.

We bend the corners again and fold the triangle. The resulting module has pockets for inserting other modules into:

Modular origami - Swan assembly diagram

We will tell you and show you how to make a swan using the modular origami technique. You should end up with something like this:

The swan is the simplest but most effective figure of modular origami. In order to make such a beautiful swan, make 458 white and 1 red modules.

We start assembling from the first two rows. To do this, we will arrange the three modules as follows:

The corners of two modules need to be inserted into the pockets of the third.

We connect the next two modules to the previous ones.

In the same way we attach two more triangles. At this moment, it seems that the structure is so fragile that it crumbles right in the hands of the master. Don't be upset. To fix this, we will construct three rows at once.

For this purpose, we take one module and install it like this:

We repeat this again with another module.

This way we form three rows, each of which consists of thirty modules. We form a circle.

Now we take the resulting skirt in our hands and press its base with our fingers. Carefully turn the product inside out.

We get the cup.

Now you need to carefully bend the edges up, giving the workpiece the following shape.

This is on the side:

This is below:

We form the sixth row, arranging the modules in a checkerboard pattern.

The seventh row begins to form the wings. To do this, we put on 12 triangles, skip 2 corners (corners from neighboring modules) and put on another 12 triangles. The neck will be modeled in place of the two missing corners, and the tail will be modeled in a wider area.

In the next row we must reduce each wing by exactly one module. Side view:

In this way, we reduce each subsequent row by one triangle until the wing is completely formed and there is only one module left at the top.

Origami is one of the fun creative activities that does not require a ton of tools and materials. As a result, it is low-cost. All you need to create paper masterpieces is to be careful and patient. Today we will learn how to make an origami swan in two ways: a simple model using one sheet of paper and modular origami.

Materials and tools

As was already said at the very beginning, origami does not require the preparation of special materials for creativity, all we need is:

• paper (standard A4 paper is perfect - it folds easily and holds its shape);
• scissors;
• skillful hands and a little patience.

Let's prepare a workplace to make it more convenient to create. We can start.

A paper swan is best suited for mastering the origami technique. Probably, everyone who is interested in this type of creativity began with just such a swan. And not in vain, because despite the simplicity of execution, the swan looks very cute.

I offer you a simple photo instruction on how to make a swan using the origami technique:

1. Take a square sheet of paper (you can take ready-made stickers that are sold at any stationery store) and fold it diagonally.
2. We straighten the sheet, then to the diagonal drawn, fold the edges to form a corner.
3. We turn it over and repeat the procedure, the corner becomes sharper.
4. Divide in half, connecting the upper and lower corners.
5. We make a swan's head by bending a smaller angle.
6. Bend the workpiece in half.
7. We move the part of the paper that is the swan's head, as shown in the photo.
8. We straighten the folds so that the swan can be in an upright position.
9. Our swan is ready.

Our warm-up has come to an end, now let's move on to a more difficult task. The next stage is the creation of modular origami.

The swan in this design looks simply magnificent. At first glance, the design seems very complicated, but soon you will find out how easy it is to create beautiful models using the origami technique. You just need to familiarize yourself with the step-by-step execution of the model.

There are many options for how to make a paper swan. Origami allows you to give new lines to products using imagination and certain skills.

We manufacture modules

The main thing you need to learn is how to compose a module (the parts that make up the entire structure).

It is done as follows:

1. To obtain pieces of paper of the required size, divide a standard A4 sheet into 16 equal parts.
2. We need to assemble modules from the blanks. The number of components depends on the size of the future model.
3. Place the rectangular piece horizontally and fold it in half.
4. We do the same thing vertically.
5. We bend the edges to the bend.
6. From the back it looks like this.
7. Fold the corners up, leaving a small gap.
8. Raise the edges up, as shown in the photo.
9. Fold the module vertically.
10. When finished it looks like this:

It is with the help of such parts that you can assemble a model of any animal or bird; for this you just need to strictly follow the assembly diagram.

Collecting the Swan

Let's move on to the main part of making the craft - assembling the modules into the intended craft. Let's consider two options for how to make a swan: from white and colored modules.

First option:

1. We take three modules and connect them as shown in the photo:

1. We attach the following two modules to the structure:

This design is completely fragile, so you should assemble the first three rows without pausing. Otherwise, your structure may fall apart.

1. With the third row we make the structure more stable:

1. After completing the third row you should get this design:

The first row of this design consists of 30 modules, then in increasing order.

1. We continue the construction by constructing the fourth and fifth rows. This is done according to the same principle as the previous ones.

1. Lightly turn the structure inside out, holding it with two fingers so as not to destroy it:

You should end up with a design like this:

1. We make the sixth row without changing the sequence of actions.
2. Proceeding to the next row, you will have to mark the position of the neck and tail. We put on 12 modules as usual, then skip two (leaving room for the neck) and put on the next 12 modules. The remaining space between them will be taken by the tail. And 12 modules on both sides give rise to the wings of a swan.

1. Starting from the ninth row, each wing will decrease by one element.

1. We continue to reduce the wings until they are crowned with one module:

1. Let's move on to the tail. It is also done by decreasing by one module with each row.

1. The final stage is drawing up the neck and head. We will need 19 white and one red blank. In the red module we glue the corners to get a beak. In order to assemble the neck, we proceed as shown in the picture, inserting the modules into each other:

1. As you go, create a natural swan neck curve:

1. All that remains is to insert the finished neck into place. The module swan is ready!

The second option repeats the first, but is made from corners of different colors. This version of the swan made using the modular origami technique is called “rainbow”. To make a rainbow model, we will need modules of different colors. This time we will not describe the actions in detail, since their order is no different from that described above.

Based on the main principles of modeling in this technique, you can build models of different shapes and colors. Combine similar colors, or play with contrast. Models look great in black and white; you can also create a smooth transition using the ombre principle - from a light shade to a darker one, or vice versa.

Life style